Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
BDT (Bolt Disassembly Tool)
Includes replaceable "tips" as they are designed to be a non-marring wear item. The screw and knob have a through hole in them to allow for a 8mm punch to be used to knock out the old tip.
Receiver has been designed to fit the bolt lugs tightly to prevent the bolt from rolling while installing or removing the roll pin
Recommended Print Settings
PLA/PETG/ABS/PA-6/PA-12
.16mm layer height
4 walls
50% infill
2 top/bottom walls
It is recommended to glue the knob to the screw to prevent over tightening the screw to the bolt face
BDT (Bolt Disassembly Tool)
Includes replaceable "tips" as they are designed to be a non-marring wear item. The screw and knob have a through hole in them to allow for a 8mm punch to be used to knock out the old tip.
Receiver has been designed to fit the bolt lugs tightly to prevent the bolt from rolling while installing or removing the roll pin
Recommended Print Settings
PLA/PETG/ABS/PA-6/PA-12
.16mm layer height
4 walls
50% infill
2 top/bottom walls
It is recommended to glue the knob to the screw to prevent over tightening the screw to the bolt face