TLMO Download
Teslong Mirror Organizer replaces the foam mirror holder included with your Teslong Borescope.
Designed for Rifle Borescope Mirrors, sizes are
0.2” (5mm) - .22 cal
0.24” (6mm) - .243 cal
0.28” (7mm) - .30 cal
0.34” (8.5mm) - .38 cal
0.4” (10mm) - .40 cal
TLMO also has an extra hole for the rubber pprotective camera cap and an SD card adapter found at the link below.
Recommended Print Settings
PLA/PETG/ABS/PA-6/PA-12
.16mm layer height
3 walls
100% infill
2 top/bottom walls
Teslong Mirror Organizer replaces the foam mirror holder included with your Teslong Borescope.
Designed for Rifle Borescope Mirrors, sizes are
0.2” (5mm) - .22 cal
0.24” (6mm) - .243 cal
0.28” (7mm) - .30 cal
0.34” (8.5mm) - .38 cal
0.4” (10mm) - .40 cal
TLMO also has an extra hole for the rubber pprotective camera cap and an SD card adapter found at the link below.
Recommended Print Settings
PLA/PETG/ABS/PA-6/PA-12
.16mm layer height
3 walls
100% infill
2 top/bottom walls
Teslong Mirror Organizer replaces the foam mirror holder included with your Teslong Borescope.
Designed for Rifle Borescope Mirrors, sizes are
0.2” (5mm) - .22 cal
0.24” (6mm) - .243 cal
0.28” (7mm) - .30 cal
0.34” (8.5mm) - .38 cal
0.4” (10mm) - .40 cal
TLMO also has an extra hole for the rubber pprotective camera cap and an SD card adapter found at the link below.
Recommended Print Settings
PLA/PETG/ABS/PA-6/PA-12
.16mm layer height
3 walls
100% infill
2 top/bottom walls